Cwd1182 Stepper Motor Driver, Stepping Motor Driver

• Customization: Available
• Application: Nc Machine Tool
• Speed: Constant Speed
• Model NO.: CWD1182
• Number of Stator: Two-Phase
• Excitation Mode: VR-Variable Reluctance
• Function: Control
• Type: Magnetic-Electric
• Certification: ISO9001, RoHS&CE
• Brand: Smart Automation
• Transport Package: Standard Export Package
• Specification: CWD1182
• Trademark: Smart Automation
• Origin: China
• HS Code: 8503009090
• Production Capacity: 10000 PCS Per Month

Product Description

 

 Stepper Motor Driver CWD1182
 

1.Introduction

Descriptions
   CWD1182 stepper motor driver is novel segmentation driver that we absorb the new and the high-speed electronic technology based on original driver .The drive uses advanced technology with the advantages of low noise, high efficiency, wide voltage range, setting flexible, especially smooth operation, accurate positioning. In addition, this driver has the function of power off  phase.
Features

1. High-performance, low price
2. micro-step
3. Automatic idle-current reduction
4. Optical isolating signal I/O
5. Max response frequency up to 200Kpps
6. Low temperature rise, smooth motion
7. Online adaptive PID technology

application
   It is suitable for a variety of small-scale automation equipment and instruments. such as labeling machine, cutting machine. packing machine, plotter, engraving machine, CNC machine and so on.
 

Electrical Specifications

Parameter	Min	Typical	Max	Unit
Input Voltage(AC)	80	-	150	VAC
Output current	0	-	8	A
Pulse Signal Frequency	0	-	200	KHZ
Logic Signal Current	7	10	16	MA

2. parameter setting
Current setting

RMS	Peak	SW1	SW2	SW3
1.5A	Default	off	off	off
1.6A	2.2A	on	off	off
2.3A	3.2A	off	on	off
3.2A	4.2A	on	on	off
3.7A	5.2A	off	off	on
4.4A	6.3A	on	off	on
5.2A	7.2A	off	on	on
5.9A	8.2A	on	on	on

Standstill Current Setting

If the host controller does not send the signal in half a second step, the drive will automatically enter power-saving semi-liquid state, phase current of motor winding will be reduced to half of the set, in this state, motor and drive power can be reduced, but the motor output torque is also reduced accordingly. Recovery automatically the output current rating when next pulse arrives.

Micro-step Setting 
 

Step/Rev	SW5	SW6	SW7	SW8
Default	on	on	on	on
400	off	on	on	on
800	on	off	on	on
1600	off	off	on	on
3200	on	on	off	on
6400	off	on	off	on
12800	on	off	off	on
25600	off	off	off	on
1000	on	on	on	off
2000	off	on	on	off
4000	on	off	on	off
5000	off	off	on	off
8000	on	on	off	off
10000	off	on	off	off
20000	on	off	off	off
40000	off	off	off	off

Connectors and Pin Assignment

Control signal Connector

Signal	Function
PUL+	Pulse signal positive	Pulse signal control the motor to run, each pulse make motor running one step.
PUL-	Pulse signal negative
DIR+	Direction signal positive	Direction control signal to control the direction motor running.
DIR-	Direction signal negative
ENA+	Enable signal positive, usually left unconnected(enable)	Motor  is offline, no internal current enable signal is active.
ENA-	Enable signal negative, usually left unconnected(enable)

Power and Motor Connector

AC	Power supply, 110VAC
AC
A+	Motor phase A
A-
B+	Motor phase B
B-