Cw8060 Micro Stepping 2-Phase Step Motor Driver
|Min. Order (Pieces)||FOB Price|
|1+||US $28-38 / Piece|
The CW8060 driver is a cost-effective and high performance stepping driver. The
design is based on an advanced control technology. It applies to two-phase or
four-phase hybrid stepping motor below 6A,such as 85BYG,57BYG. Due to the
adoption of the advanced bipolar constant-current chopper driver technology. It shows
many features such as stable operation and excellent high speed torque. It has 14
kinds of micro-step, and the maximum number of micro-step is 1/256(step number is
51200 steps/rev);its current range is 2A-6A,the output current has 8 settings, and the
current resolution is about 0.5A; it has many functions such as automatic semi-flow,
over-voltage, under-voltage and over-current protection. The driver is the DC power
supply, the operating voltage range should be 36VDC-80VDC,and it should not
exceed 90VDC and not less than 24VDC.
It is suitable for a variety of large-scale automation equipments and instruments,
such as labeling machine, cutting machine, packaging machine, plotter, engraving
machine, CNC machine tools and so on.
High-performance, low price
Automatic idle-current reduction
Optical isolating signal I/O
Max response frequency up to 75Kpps
Low temperature rise, smooth motion
Online adaptive PID technology
It is suitable for a variety of small-scale automation equipment and instruments.
such as labeling machine, cutting machine. packing machine, plotter, engraving
machine, CNC machine and so on.
Standstill Current Setting
SW4 is used for standstill current setting. OFF means that the standstill current is half of the
dynamic current; and ON means that standstill current is the same as the selected dynamic current.
Usually the SW4 is set to OFF, in order to reduce the heat of the motor and driver
Power and Motor Connector